How to make a paracord snake knot?

Hey there, fellow DIY enthusiasts! If you're into making cool stuff with paracord, you're in for a treat. Today, I'm gonna show you how to make a paracord snake knot. And yeah, I'm a paracord supplier, so I know my way around this amazing cord.

First off, let's talk a bit about paracord. It's super versatile and tough. You've probably heard of Paracord 550. This type of paracord is named for its minimum breaking strength of 550 pounds. It's got multiple inner strands, which makes it not only strong but also great for all sorts of projects. Whether you're making a survival bracelet or a keychain, Paracord 550 is a top choice.

Paracord with buckle (4) Paracord 550 (2)

Now, if you're looking for something a bit more convenient, check out Paracord with Buckle. These pre - made pieces with buckles can save you a lot of time when you're in a hurry to finish a project. And of course, there are Paracord Bracelets. They're not only stylish but also useful. You can wear them as a fashion statement or have them on hand in case of an emergency.

Alright, let's get down to business and learn how to make a paracord snake knot.

What You'll Need

Paracord: You can choose the color and type you like. I recommend using Paracord 550 for its strength and durability.
A buckle or a ring: This will be the centerpiece around which you'll form the snake knot.
Scissors: To cut the paracord.
A lighter: To seal the ends of the paracord and prevent fraying.

Step 1: Prepare Your Paracord

Cut a length of paracord. The length depends on how long you want your finished piece to be. A good rule of thumb is to cut about 6 - 8 feet for a medium - sized bracelet. Once you've cut the paracord, use the lighter to quickly pass the ends through the flame. This will melt the plastic coating and seal the ends. Just be careful not to burn the cord too much.

Step 2: Attach the Paracord to the Buckle or Ring

Take the middle of the paracord and loop it around the buckle or ring. Pull the two ends of the paracord through the loop you just made. Then, pull the ends tight to secure the paracord to the buckle or ring. This is your starting point.

Step 3: Start the Snake Knot

Let's call the two ends of the paracord the "working ends". Take one working end and pass it over the other working end, then under the loop that's formed around the buckle or ring. Pull it through and tighten it gently. Now, take the other working end and do the same thing in the opposite direction. Pass it over the first working end, then under the loop around the buckle or ring, and pull it through and tighten.

Step 4: Repeat the Process

Keep repeating the steps in Step 3. Each time you alternate the working ends, you'll notice the snake - like pattern starting to form. Make sure to keep the tension even as you go along. If the tension is too loose, the knot will look messy. If it's too tight, it'll be hard to work with.

Step 5: Keep Going Until You Reach the Desired Length

Continue making the snake knot until your piece is as long as you want it. If you're making a bracelet, you might want to measure it against your wrist to get the right fit.

Step 6: Finish the Knot

Once you've reached the desired length, you need to finish the knot. There are a few ways to do this. One simple way is to tuck the working ends under a few of the previous loops. Then, use the lighter to seal the ends again. Trim any excess cord if needed.

Tips and Tricks

Practice makes perfect. Don't be discouraged if your first try doesn't turn out as well as you'd like. Keep at it, and you'll get better with each attempt.
If you want to add some color to your snake knot, you can use different colored paracords. You can alternate colors every few knots or create a more complex pattern.
Use a pair of pliers to help you tighten the knots more evenly, especially when you're working with a small buckle or ring.

Now that you know how to make a paracord snake knot, you can get creative. You can make bracelets, keychains, lanyards, or even use it as a decorative element on other projects.

As a paracord supplier, I've seen all sorts of amazing projects that people have made with paracord. It's really a great material that allows you to express your creativity. Whether you're a beginner or an experienced DIYer, there's always something new to learn and create with paracord.

If you're interested in purchasing high - quality paracord for your projects, we've got a wide range of options available. We offer different colors, types, and lengths of paracord to suit your needs. Whether you're making a small keychain or a large survival bracelet, we've got you covered. If you have any questions about our products or need advice on your projects, feel free to reach out. We're here to help you bring your ideas to life.