1. Basic cross method
The first method is the basic cross method. This method is super simple and it is also the first one I learned. Just cross two elastic cords, then press one cord on top of the other cord, make a circle and tighten it. Then do the same with the other cord to form a cross knot. To ensure that it is strong, I will repeat this step twice and tie two cross knots.
2. Looping method
The second method is the looping method. This method is particularly suitable for stringing beads or making bracelets. I will first pass an elastic cord from the forked end into the small ring end, then push all the beads to the small ring end, and then tighten the elastic cord that is passed through the small ring end. Then cross the left and right hand lines and tighten them, repeating several times to ensure that they will not fall apart. Finally, I will hide the knot in the bead hole of a nearby bead, and cut off the excess line with scissors by leaving 1 to 2 mm.
3. Parallel method
The third method is the parallel method. This method is especially suitable for use when you need to tie a knot quickly. I will first use the index finger and thumb of my left hand to press the size of the hand circumference, and then use my right hand to pull the two parallel elastic ropes to quickly tie the knot. After tying the knot, cut off the excess thread and hide the knot in the hole of the bead.
4. Single knot reinforcement method
In addition to the above three methods, I will also use a single knot reinforcement method. This method is to tie a single knot on the basis of a single knot. In this way, there is a double guarantee. Even if one of the knots is loosened, the other knot can continue to work.
5. Use tools to assist
In the process of knotting, I will also use some tools to assist. For example, the threading needle can help me thread the beads and tie the knot more smoothly. Especially when stringing beads, with the help of the threading needle.
6. Consider the material characteristics
Elastic ropes of different materials may have different elasticity and wear resistance, so when choosing and using knotting methods, I will also adjust according to actual conditions. For example, for elastic ropes with good elasticity, I will choose a tighter knotting method to ensure that it will not fall apart due to excessive elasticity. For elastic ropes with poor wear resistance, I will try to reduce the friction at the knot to extend its service life.
7. Regular inspection and maintenance
The last point is also very important, that is, to regularly check whether the elastic rope and its knot are worn or loose. If there is wear or looseness, I will replace it with a new elastic rope or re-knot it in time.
