1. Button removal
Buttons are a type of snap that we often use in our daily lives, and the removal method is relatively simple. First, you need to prepare a small hook with a suitable curvature and size, insert the hook into the small hole at the bottom of the button, and then gently pull it up, and the button will loosen. If the button is connected to the clothing, you need to cut the thread on the button with scissors, and then remove the button according to the above method.
2. Button removal
Buttons are a type of snap with grooves and protrusions, which are difficult to remove. The method of removing buttons depends on the type of button. Generally speaking, if it is a metal button, you can use a flat hammer to knock on both sides of the button, then loosen it with a small wrench, and finally remove the button with pliers. If it is a plastic or resin button, you need to use special removal tools, such as a sharp knife, flat pliers, toothbrush, etc., carefully check the interface between the button and the clothing, find the connection point, and easily remove the button.
3. Snap button removal
Snap buttons refer to a complex snap button composed of two parts that are combined with each other. The method of disassembling snaps is also relatively complicated, and usually requires some professional disassembly tools, such as a small wrench, a plastic metal hammer, a wrench, etc. First, you need to use a small wrench to loosen the nut on the snap base, then tap the upper protective cover with a plastic metal hammer, and finally remove the protective cover with a wrench.
